UniFi cameras

G6 Bullet

Tube on an arm. Looks like a camera from the street. Long driveways, fence lines, loading doors. Where being seen is the point.

$307 all-inCAD, the checkout number, updated daily

Ubiquiti G6 Bullet
Where it sits

One below, this one, one above.

ONE DOWN

G6 Turret

$307 all-in

The default. Front of house, back yard, shop floor, parking. Black or white.

THIS ONE

G6 Bullet

$307 all-in

Long driveways, fence lines, loading doors. Where being seen is the point.

ONE UP

G6 Dome

$431 all-in

Hallways, lobbies, parkades, anywhere the public can reach up and grab it.

Over the G6 Turret you get: Same picture, same price. Pick by shape. The Bullet is the one people see from the street.

The G6 Dome adds: An IK10 vandal shell that sits flat on a ceiling. Nothing else changes. Only worth it where a hand can reach the camera.

See the whole line side by side

GOOD FOR
  • Same picture as the Turret. 30 m in the dark.
  • The visible shape. People change what they do when they see it.
  • Lowest power of the three at 9.9 W.
KNOW BEFORE YOU BUY
  • Rated to minus 20, not minus 30 like the Turret.
  • Sticks out. Easier to knock and easier to spot.
What it needs

To make it work.

One network cable to a PoE switch port (9.9 W). A recorder.

The numbers

Full specs.

Resolution8MP 3840 x 2160 (16:9)
Sensor1/1.8" 8MP
LensFixed focal length
Field of viewH: 109.9°, V: 56.7°, D: 134.1°
Night vision30 m
Frame rate30 FPS
PowerPoE
Power draw9.9 W
Network port10/100 MbE RJ45 port
Weather ratingIP66
Vandal ratingIK04
Operating temperature-20 to 50° C (-4 to 122° F)
AudioMicrophone
Smart detectionsYes
Face recognitionYes
Licence plate readingYes
NDAA compliantYes
SizeWithout mount: ⌀82 x 88.8 mm (⌀3.2 x 3.5")
With mount: ⌀82 x 153 mm (⌀3.2 x 6")
WeightWithout mount: 587 g (1.3 lb)
With mount: 737 g (1.6 lb)
MountingWall, ceiling, pole mount (Included)
Junction box, angled base (Optional)

Source: techspecs.ui.com, verified 2026-09-12. Model UVC-G6-Bullet.

Keep reading

Want it installed?

We design the layout, pull the cable, mount it and set up the recorder. Book a design assessment and the fee comes off the install.