UniFi UPS

UPS Tower

Tower on the floor, ten outlets. The floor model. 600 W, ten outlets, rides through a flicker and shuts things down cleanly.

$247 all-inCAD, the checkout number, updated daily

Ubiquiti UPS Tower
Where it sits

One below, this one, one above.

ONE DOWN

Nothing

This is the floor.

THIS ONE

UPS Tower

$247 all-in

The floor model. 600 W, ten outlets, rides through a flicker and shuts things down cleanly.

ONE UP

UPS 2U

$431 all-in

The rack model. 1,000 W, swappable battery, clean shutdown for the recorder.

The UPS 2U adds: 1,000 W, a rack mount, a swappable battery and 8 minutes at half load.

See the whole line side by side

GOOD FOR
  • Five battery outlets, five surge only. Standard plug.
  • Shows up in the UniFi app like everything else.
KNOW BEFORE YOU BUY
  • Two minutes at full load, seven at half. It is for flickers, not outages.
  • Simulated sine wave. Fine for network gear, not for a lab.
What it needs

To make it work.

A wall socket and a network port.

The numbers

Full specs.

Capacity1,000VA/600W
TypeLine interactive
Battery(1) Lead Acid 12V, 9Ah
RuntimeFull load: 2 min
Half load: 7 min
Recharge6-8 hours recovery to 90% capacity
Transfer time6 ms typical; 10 ms max. (Battery mode)
Wave formSimulated sine wave (Battery mode)
Input range89-145V AC
Output120V AC
Outlets(5) Battery backup/surge protection: NEMA 5-15R
(5) Surge protection: NEMA 5-15R
Network(1) 100/10 MbE port for network connection
(2) GbE ports for surge in/out
FormDesktop
Size288 x 99 x 280.5 mm (11.3 x 3.9 x 11")
Weight8.17 kg (18 lb)
Operating temperature0 to 40° C (32 to 104° F)
CertificationsFCC, IC, UL 1778, CSA C22.2 No. 107.3
NDAA compliantYes

Source: techspecs.ui.com, verified 2026-09-11. Model UPS-Tower.

Keep reading

Want it installed?

We rack it, plug in what matters, and set up the graceful shutdown. Book a design assessment and the fee comes off the install.